Kay, R.; Jakubiec, J. A.; Katrycz, C.; Hatton, B. D. Multilayered optofluidics for sustainable buildings. Proceedings of the National Academy of Sciences (PNAS) 2023, 120(6), e2210351120

Kay, R.; Katrycz, C.; Nitièma, K.; Jakubiec, J. A.; Hatton, B. D. Decapod-inspired pigment modulation for active building facades. Nature Communications 2022, 13(1), 1-13.

Kay, R.; Mattacchione, A.; Katrycz, C.; Hatton, B. D. Stepwise slime mould growth as a template for urban design. Scientific Reports 2021, 12(1), 1-15.

N. Lavielle, D. Asker, B.D. Hatton, Lubrication dynamics of swollen silicones to limit long term fouling and microbial biofilms. Soft Matter 2021, 17, 936.

Balakrishnan, M.; Shrestha, P.; Ge, N.; Lee, C.; Fahy, K. F.; Zeis, R.; Schulz, V. P.; Hatton, B. D.; Bazylak, A. Designing Tailored Gas Diffusion Layers with Pore Size Gradients via Electrospinning for Polymer Electrolyte Membrane Fuel Cells. ACS Applied Energy Materials 2020, 3 (3), 2695.

K. Kimmins, B.D. James, M.-T. Nguyen, D. Asker, B.D. Hatton, E.D. Sone, Oil-Infused Silicone Prevents Zebra Mussel Adhesion. ACS Applied Bio Materials 2019, 2 (12), 5841.

Wang, W.; Timonen, J. V.; Carlson, A.; Drotlef, D.-M.; Zhang, C. T.; Kolle, S.; Grinthal, A.; Wong, T.-S.; Hatton, B.; Kang, S. H.et al. Multifunctional ferrofluid-infused surfaces with reconfigurable multiscale topography. Nature 2018, 559 (7712).

T. Awad, D. Asker, B.D. Hatton, Modification of stainless steel food processing surfaces to reduce bacterial biofilm growth. ACS Applied Materials and Interfaces 2018, 10 (27), 22902.

D. Asker, P. Baker, T. Awad, L. Howell, B.D. Hatton, "Non-eluting, surface-bound enzymes disrupt bacterial surface attachment through continuous polysaccharide degradation". Biomaterials, 167, 168-176 (2018).

C.A. Stewart, Y, Finer, B.D. Hatton, "Drug self-assembly for synthesis of highly-loaded antimicrobial drug-silica particles." Scientific Reports, 8(1), 895 (2018).

S. Chevalier, N. Lavielle, B.D. Hatton, A. Bazylak, “Novel electrospun gas diffusion layers for polymer electrolyte membrane fuel cells: Part I. Fabrication, morphological characterization, and in situ performance.” Journal of Power Sources 352, 272-280 (2017).

S. Chevalier, N. Ge, N. Lavielle, B.D. Hatton, A. Bazylak, “Relationship between the gas diffusion layer structure and PEM fuel cell performance: II. Effect of fibre diameter and alignment on in operando liquid water distributions”. Journal of Power Sources 352, 281-290 (2017).

Z.J. Farsangi, A. Beitollahi , B.D. Hatton, S. Sarkar, M.R. Jaafari, M. Rezayat, A. Amania, F. Gheybia, “One-pot controllable synthesis of carboxylic group functionalized hollow mesoporous silica nanospheres for efficient cisplatin delivery”. RSC Advances 6, 67592 (2016).

B.D. Hatton. “Antimicrobial coatings for metallic biomaterials”. Book chapter in: Wen C, editor. Surface Coating and Modification of Metallic Biomaterials. Woodhead Publishing, p. 379-91, (2015).

N. MacCallum, R. Friedlander, C. Howell, J. Lin, D. Sun, T. S. Wong, B. D. Hatton, P. Kim, J. Aizenberg, “Oil-infused silicone tubing as a biomedical material that prevents bacterial accumulation” ACS Biomaterials Science and Engineering 1, 43-51 (2015).

D. C. Leslie, A. Waterhouse, J. B. Berthet, T. M. Valentin, A. L. Watters, A. Jain, P. Kim, B. D. Hatton, A. Nedder, K. Mullen, E. H. Super, C. Howell, C. P. Johnson, T. Vu, S. Rifai, A. Hansen, M. Aizenberg, M. Super, J. Aizenberg, D. E. Ingber, “A bioinspired omniphobic surface coating on medical devices prevents thrombosis and biofouling” Nature Biotechnology 32, 1134-1140 (2014).

B. D. Hatton, “Antimicrobial coatings for metallic biomaterials”, Book chapter in Surface coating and modification of metallic biomaterials. Woodhead Publishing (2014).

T. Wang, L. Chang, B.D. Hatton, J. Kong, G. Chen, Y. Jia, D. Xiong, C. Wong, “Preparation and hydrophobicity of biomorphic ZnO/carbon based on a lotus-leaf template”. Materials Science and Engineering C, 43, 310-316 (2014).

C. Qian, W. Sun, L. Wang, C. Chen, K. Liao, W. Wang, J. Jia, B.D. Hatton, G. Casillas, M. Kurylowicz, C. Yip, M.L. Mastronardi, G.A. Ozin, “Non-wettable, Oxidation-Stable, Brightly Luminescent, Perfluorodecyl-Capped Silicon Nanocrystal Film”, J. American Chemical Society 136(45) 15849-15852 (2014).

L. Mishchenko, Y. Vasquez, B. D. Hatton, M. Kolle, J. Aizenberg, “Three-Phase Co-Assembly: In-situ Incorporation of Nanoparticles into Tunable, Highly-Ordered, Porous Silica Films”, ACS Photonics 1, 53-60 (2014).

N. Vogel, R. Belisle, B. D. Hatton, T. S. Wong, J. Aizenberg, “Fully transparent, omniphobic surfaces and based on inverse colloidal monolayers”, Nature Communications 4, 2167 (2013).

L. Mishchenko, J. Aizenberg, B.D. Hatton, “Spatial Control of Condensation and Freezing on Superhydrophobic Surfaces with Hydrophilic Patches”, Advanced Functional Materials 23, 4577-4584 (2013).

B. D. Hatton, I. Wheeldon, M. J. Hancock, M. Kolle, J. Aizenberg, D. E. Ingber, “An artificial vasculature for adaptive thermal control of windows”, Solar Energy Materials and Solar Cells 117, 429-436 (2013).

M. A. Bucaro, Y. Vasquez, B. D. Hatton, J. Aizenberg, “Fine-Tuning the Degree of Stem Cell Polarization and Alignment on Ordered Arrays of High-Aspect-Ratio Nanopillars”, ACS Nano 6(7), 6222-6230 (2012).

L. Mishchenko, B. D. Hatton, M. Kolle, J. Aizenberg, “Patterning Hierarchy in Direct and Inverse Opal Crystals”, Small 8(12), 1904-1911 (2012).

B. D. Hatton, J. Aizenberg, “Writing on Superhydrophobic Nanopost Arrays – Topological Control for Bottom-up Assembly”, Nano Letters 12, 4551-4557 (2012).

W. Wang, I.B. Burgess, B.D. Hatton, J. Alvarenga, J. Aizenberg, Secrets revealed—Spatially selective wetting of plasma-patterned periodic mesoporous organosilica, Canadian Journal of Chemistry 90(12) 1063-1068 (2012).

T. S. Wong, S. H. Kang, S. K. Y. Tang, E. J. Smythe, B. D. Hatton, A. Grinthal, J. Aizenberg, “Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity”, Nature 477, 443-447 (2011).

I.B. Burgess, L. Mishchenko, B.D. Hatton, M. Kolle, M. Lončar, J. Aizenberg, Encoding complex wettability patterns in chemically functionalized 3D photonic crystals, Journal of the American Chemical Society 133(32) 12430-12432 (2011).

L. Mishchenko, B. D. Hatton, V. Bahadur, J. A. Taylor, T. Krupenkin, J. Aizenberg “Design of ice-free surfaces based on repulsion of impacting water droplets”, ACS Nano 4 (12), 7699-7707 (2010).

B. D. Hatton, L. Mishchenko, S. Davis, K. Sandhage, J. Aizenberg, “Assembly of large-area, highly ordered, crack-free inverse opal films”, Proc. National Acad. Sciences 107 (23), 10354-9 (2010).

B. D. Hatton, V. Kitaev, D. Perovic, G. A. Ozin, J. Aizenberg, “Low-temperature synthesis of nanoscale silica multilayers – atomic layer deposition in a test tube”, J. Materials Chemistry 20, 6009-13 (2010).

B. D. Hatton, K. Landskron, W. J. Hunks, M. R. Bennett, D. Shukaris, D. D. Perovic, G. A. Ozin, “Materials chemistry for low-k materials”, Materials Today 9 (3), 22-31 (2006).

B. D. Hatton, K. Landskron, W. Whitnal, D.D. Perovic, G.A. Ozin, “Spin-Coated Periodic Mesoporous Organosilica (PMO) Thin Films – Towards a New Generation of Low k Materials”, Advanced Functional Materials, 15(5) 715-722 (2005).

A. Arsenault, S. Fournier-Bidoz, B. Hatton, H. Míguez, N. Tétreault, E. Vekris, S. Wong, S.M. Yang, V. Kitaev, G.A. Ozin, Towards the synthetic all-optical computer: science fiction or reality?, Journal of Materials Chemistry 14(5) 781-794 (2004).

K. Landskron, B. D. Hatton, D. D. Perovic, G. A. Ozin, “Periodic Mesoporous Organosilicas Containing Interconnected [Si(CH2)]3 Rings”, Science 302 (5643), 266-269 (2003).

T. Uchikoshi, K. Ozawa, B.D. Hatton, Y. Sakka, Dense, bubble-free ceramic deposits from aqueous suspensions by electrophoretic deposition, Journal of Materials Research 16(02) 321-324 (2001).

B.D. Hatton, P.S. Nicholson, Design and fracture of layered Al2O3/TZ3Y composites produced by electrophoretic deposition, Journal of the American Ceramic Society 84(3) 571-576 (2001).